The Sump Shark CECOR's smallest sumpcleaner, the Sump Shark, has a unique vertical design for shops with limited floor space. High suction lift sucks out everything in the sump - chips, fine
particles and fluid.
Sixty gallon vertical tank.
Pumping rate to 70 gallons per minute.
Generates suction to 26" Hg (Mercury) or 350" water.
Air operated venturi creates vacuum in the tank.
Pump in/pump out capability.
Operates on plant air supply.
Industrial casters hold up in tough environments.
Automatic Overfill protection.
All discharge ports are valved.
F10 1 cubic foot filter is standard.
Caution: Machines must not be used for flammable fluids (fuels,
paints, solvents, etc.) . Avoid use in extra-high temperature or
spark-hazard environments (ovens, welding areas, etc.)
Requires air runs (headers) of
3/4" or larger and verticals
(drops) of 1/2" or more with line
pressure of 75 to 120 PSI
(pounds per square inch) 53 to
80 CFM (cubic feet per minute).
Pumping Rate:
Up to 70 gallons per minute.
Pressure Discharge:
6 PSI (pounds per square inch) with safety backup valve.
Filter:
F10 Filter has 1 cubic foot
capacity and is standard on the
SA5. Optional F23 (2.3 cubic
feet) capacity is recommended
when coolant is loaded with
chips and swarf.
Spill Prevention:
Automatic overfill protection. All
discharge ports are valved.
Hose:
1-1/2" I.D. x 16' oil-resistant PVC
suction/discharge hose including
quick-disconnect couplers and
suction tools.
The Sump Shark
Cecor™ 102 Lincoln St. • Verona, WI 53593 • 800-356-9042 • E-mail: cecor@cecor.net • fax: 608-845-6792